{"title":"Boards","description":null,"products":[{"product_id":"3-pack-esp32-c3-oled-wifi-ble-lipo-shield","title":"ESP32-C3 OLED Dev Board + LiPo Shield, 3-Pack","description":"\u003cp\u003eTiny ESP32-C3 boards with a built-in OLED screen, plus three expansion shields that add a LiPo battery port. For battery-powered sensors and small connected devices.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen on board.\u003c\/strong\u003e A 0.42-inch 72 × 40 OLED is already wired, handy for readings and debugging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi and Bluetooth LE.\u003c\/strong\u003e ESP32-C3 RISC-V chip at up to 160MHz with 4MB flash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup.\u003c\/strong\u003e With USB-C connected the shield runs the board and charges the battery; unplug it and the battery takes over without a reboot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree shield styles.\u003c\/strong\u003e 2.54mm expansion, screw terminal and non-screw terminal, each with a LiPo port and a regulated 3.3V supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery monitoring.\u003c\/strong\u003e Short the monitor pads to read the battery voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32-C3 OLED development board\u003c\/li\u003e\n\u003cli\u003e1 × 2.54mm expansion shield with LiPo battery port\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal shield with LiPo battery port\u003c\/li\u003e\n\u003cli\u003e1 × non-screw terminal shield with LiPo battery port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e ESP32-C3FH4, single-core RISC-V, up to 160MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 4MB flash, 400kB SRAM, no PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 0.42 in, 72 × 40, SH1106 at 0x3C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard size:\u003c\/strong\u003e 25 × 20.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, ESP-IDF and MicroPython. Contents shown are for the 3-pack set; LiPo batteries and jumper wires are sold separately.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"3-Pack Set","offer_id":48759354294429,"sku":null,"price":54.99,"currency_code":"AUD","in_stock":true},{"title":"OLED Board","offer_id":48759354327197,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true},{"title":"Screw Terminal Board","offer_id":48759354359965,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true},{"title":"Screwless Terminal Board","offer_id":48759354392733,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true},{"title":"Expansion Board","offer_id":48759354425501,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81LQd06CrUL._AC_SL1500.jpg?v=1786085087"},{"product_id":"3-pack-esp32-dev-board-lipo-ups-charger-shields","title":"ESP32 LiPo Dev Board + 3 Shields, 3-Pack","description":"\u003cp\u003eThree ESP32 boards with a built-in LiPo charger that keeps your program running when USB-C is unplugged, plus three shields.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps running off USB.\u003c\/strong\u003e The power path runs the board from USB while the battery charges, then switches to the battery without a reset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 mA charger.\u003c\/strong\u003e For a single-cell 3.7 V LiPo or protected 18650 on the JST-PH 2.0 port (battery not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery monitoring.\u003c\/strong\u003e Bridge the BATTERY MONITOR pads on a shield to read the battery on IO36 through a 1:2 divider.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree shields.\u003c\/strong\u003e 2.54 mm header, spring terminal and screw terminal, each with its own on\/off switch and fully assembled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolder the headers.\u003c\/strong\u003e Header strips ship unfitted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32 LiPo board (header strips not fitted)\u003c\/li\u003e\n\u003cli\u003e3 × shield: 2.54 mm header, spring terminal, screw terminal\u003c\/li\u003e\n\u003cli\u003e6 × JST PH 2.0 cable\u003c\/li\u003e\n\u003cli\u003e6 × male header strip\u003c\/li\u003e\n\u003cli\u003e1 × storage case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C, CH340 serial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e 500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3.7 V, one cell, JST-PH 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on macOS, Windows and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155056285,"sku":"B0H6FT575J","price":41.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/513ASckpTiL.jpg?v=1788828927"},{"product_id":"3-pack-esp32-gold-edition-3-expansion-bases","title":"ESP32 Gold Edition + 3 Bases, 3-Pack","description":"\u003cp\u003eThree ESP32 Gold Edition boards with header pins fitted, plus one each of the expansion, pluggable terminal and screw terminal bases. For home automation, wireless sensors and learning the ESP32.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-WROOM-32E.\u003c\/strong\u003e Dual-core with built-in Wi-Fi and Bluetooth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree ways to wire.\u003c\/strong\u003e A 2.54 mm expansion base with male and female headers, a tool-free pluggable terminal base, and a screw terminal base for permanent installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e The boards plug straight into every base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB status LED.\u003c\/strong\u003e A WS2812 on GPIO2 for visual feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Lead-free immersion gold plating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32 Gold Edition board (ESP32-WROOM-32E), header pins fitted\u003c\/li\u003e\n\u003cli\u003e1 × expansion base (2.54 mm)\u003c\/li\u003e\n\u003cli\u003e1 × pluggable terminal base\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal base\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard LED:\u003c\/strong\u003e WS2812 RGB on GPIO2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C, power and data\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE and other ESP32 toolchains on macOS and Windows.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155089053,"sku":"B0FR3GVRD5","price":41.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/511RJyJCFNL.jpg?v=1788828928"},{"product_id":"3-pack-esp32-ipex-antenna-3-expansion-bases","title":"ESP32 IPEX Antenna Edition + 3 Bases, 3-Pack","description":"\u003cp\u003eThree ESP32 boards with an external IPEX antenna, plus one each of the expansion, pluggable terminal and screw terminal bases. For wireless projects that live inside a box.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e Place the IPEX antenna outside an enclosure for longer Wi-Fi and Bluetooth range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree ways to wire.\u003c\/strong\u003e A 2.54 mm expansion base with male and female headers, a tool-free pluggable terminal base, and a screw terminal base for permanent installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e The boards plug straight into every base, no soldering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB status LED.\u003c\/strong\u003e A WS2812 on GPIO2 for visual feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e For power and programming; a cable is included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32 board, IPEX antenna edition, headers fitted\u003c\/li\u003e\n\u003cli\u003e1 × 2.54mm expansion base\u003c\/li\u003e\n\u003cli\u003e1 × pluggable terminal base\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal base\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × storage container\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard LED:\u003c\/strong\u003e WS2812 RGB on GPIO2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Lead-free immersion gold (ENIG)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE and other ESP32 toolchains on macOS, Windows and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155121821,"sku":"B0FRXZD6VC","price":48.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51v6iStztmL.jpg?v=1788828929"},{"product_id":"3-pack-esp32-s3-n16r8-dev-board-3-terminal-bases","title":"ESP32-S3 Gold Edition Dev Board + 3 Bases, 3-Pack","description":"\u003cp\u003eThree ESP32-S3 Gold Edition development boards with 16 MB flash and 8 MB PSRAM, and three plug-in bases for wiring them up. For IoT, sensor and wireless projects.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 MB flash, 8 MB PSRAM.\u003c\/strong\u003e Dual-core 240 MHz with room for large programs and OTA updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard antenna.\u003c\/strong\u003e 2.4 GHz Wi-Fi and Bluetooth LE with no external antenna needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-in bases.\u003c\/strong\u003e Expansion and terminal bases for breadboard work or secure wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition board.\u003c\/strong\u003e Lead-free immersion gold (ENIG) finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Dual-core, 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi, Bluetooth LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5 V via USB-C, or 5 to 12 V via VIN. Do not exceed 5 V on USB-C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155187357,"sku":"B0FL149DGM","price":54.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51AepAmBa5L.jpg?v=1788828930"},{"product_id":"3-pack-esp32-s3-n16r8-ipex-antenna-terminal-base","title":"ESP32-S3 Gold Edition IPEX + 3 Bases, 3-Pack","description":"\u003cp\u003eThree ESP32-S3 Gold Edition boards with external IPEX antennas, plus one each of the expansion, screw terminal and screwless terminal bases.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 MB flash, 8 MB PSRAM.\u003c\/strong\u003e Room for large programs, OTA updates and buffers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e The IPEX antenna can sit outside an enclosure for better Wi-Fi and Bluetooth coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree ways to wire.\u003c\/strong\u003e 2.54 mm expansion, screw terminal and screwless terminal bases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual USB-C.\u003c\/strong\u003e Separate ports for power and data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition board.\u003c\/strong\u003e Black PCB with lead-free immersion gold (ENIG) finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32-S3 N16R8 Gold Edition board\u003c\/li\u003e\n\u003cli\u003e3 × external IPEX antenna\u003c\/li\u003e\n\u003cli\u003e1 × 2.54mm expansion board\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal board\u003c\/li\u003e\n\u003cli\u003e1 × screwless terminal board\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Dual-core Xtensa LX7, 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi (802.11 b\/g\/n), Bluetooth LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5 V via USB-C, or 5 to 12 V via VIN. Do not exceed 5 V on USB-C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on macOS, Windows and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155220125,"sku":"B0G4PW2518","price":89.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/611b2KLJ_zL.jpg?v=1788828931"},{"product_id":"3-pack-nano-v3-0-atmega328p-usb-c-pinpulse-led-shield","title":"Nano V3.0 USB-C + PinPulse LED Shield, 3-Pack","description":"\u003cp\u003eThree ATmega328P Nano V3.0 boards with USB-C, plus a PinPulse shield that puts a status LED on every I\/O pin. For learning Arduino and debugging circuits at a glance.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSee every pin.\u003c\/strong\u003e The PinPulse shield shows HIGH or LOW on TX\/RX, D2 to D13 and A0 to A7.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuffered LEDs.\u003c\/strong\u003e SN74HC04D inverters drive the LEDs, keeping the load off your I2C, SPI and UART signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale and female on every pin.\u003c\/strong\u003e Dual 2.54 mm headers take any jumper wire type.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e A reversible connector on every Nano.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArduino IDE compatible.\u003c\/strong\u003e Existing Nano sketches, libraries and shields work as they are.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × Nano V3.0 board, USB-C\u003c\/li\u003e\n\u003cli\u003e1 × PinPulse shield\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × printed quick-start card (CH340 driver and Arduino IDE setup)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P at 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 32 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSRAM:\u003c\/strong\u003e 2 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEEPROM:\u003c\/strong\u003e 1 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital I\/O:\u003c\/strong\u003e 14, 6 with PWM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB serial:\u003c\/strong\u003e CH340\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE. Sensor and display modules shown in photos are not included.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155252893,"sku":"B0H9PZD7VF","price":41.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51aWn969QpL.jpg?v=1788828932"},{"product_id":"esp32-pinpulse-shield-gpio-led-display-port","title":"ESP32 Gold Edition + PinPulse Shield","description":"\u003cp\u003eAn ESP32 Gold Edition board (ESP32-WROOM-32E) with its PinPulse shield: an LED on every GPIO so you can see pin states at a glance, plus a display port. Good for beginners and for debugging.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 GPIO LEDs.\u003c\/strong\u003e One LED per GPIO, driven through high-impedance logic so SPI and I2C keep working normally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Each GPIO breaks out to 2.54 mm male pins and female sockets, taking any jumper wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e A 15-way FPC connector links Lonely Binary TFT, E-Ink and touch displays with one ribbon cable (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e The shield arrives with its headers already soldered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition board.\u003c\/strong\u003e ESP32-WROOM-32E with a lead-free immersion gold finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ESP32 Gold Edition board (ESP32-WROOM-32E)\u003c\/li\u003e\n\u003cli\u003e1 × ESP32 PinPulse shield, headers fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO LEDs:\u003c\/strong\u003e 24, one per GPIO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIOs at the edge:\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay connector:\u003c\/strong\u003e 15-way FPC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32E\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155580573,"sku":"B0GR4SWQ6P","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51B-76GzxxL.jpg?v=1788828940"},{"product_id":"esp32-wroom-32ue-ipex-antenna-gpio-led","title":"ESP32 Gold Edition + PinPulse Shield, IPEX Antenna","description":"\u003cp\u003eAn ESP32-WROOM-32UE board with an external IPEX antenna, mounted on the PinPulse shield with an LED on every GPIO. Suited to IoT devices inside metal enclosures, behind walls or far from the router.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e An IPEX (U.FL) connector and the included 2.4 GHz antenna extend Wi-Fi and Bluetooth range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO LEDs.\u003c\/strong\u003e Each GPIO has an LED buffered through 74HC14D logic, showing HIGH and LOW without disturbing SPI, I2C, UART or PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Every GPIO has a male pin and a female socket, taking any jumper wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e An FPC connector links Lonely Binary TFT, E-Ink and touch displays with one ribbon cable (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Lead-free ENIG plating for good oxidation resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ESP32 Gold Edition board (ESP32-WROOM-32UE)\u003c\/li\u003e\n\u003cli\u003e1 × PinPulse shield\u003c\/li\u003e\n\u003cli\u003e1 × 2.4 GHz IPEX antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32UE, dual-core Xtensa LX6, 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth Classic + BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e External, IPEX \/ U.FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, ESP-IDF and MicroPython.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155613341,"sku":"B0GR4Q23JV","price":31.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51yRqWBHv8L.jpg?v=1788828941"},{"product_id":"esp32-s3-n16r8-gold-edition-dev-board-ipex-antenna","title":"ESP32-S3 Gold Edition Dev Board, IPEX Antenna","description":"\u003cp\u003eThe ESP32-S3 Gold Edition with an external IPEX antenna, for projects where the board sits in an enclosure or far from the router.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e Position the IPEX antenna where the signal is best for Wi-Fi and Bluetooth, away from the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 MB flash, 8 MB PSRAM.\u003c\/strong\u003e Room for OTA updates, large programs and data-heavy IoT work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-C ports.\u003c\/strong\u003e Separate ports for power and data. Feed 5 V over USB-C or 5–12 V to VIN; never more than 5 V on USB-C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Black PCB with lead-free ENIG plating and clear silkscreen labels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ESP32-S3 Gold Edition board (N16R8)\u003c\/li\u003e\n\u003cli\u003e1 × IPEX antenna\u003c\/li\u003e\n\u003cli\u003eHeader strips (unsoldered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e ESP32-S3, dual-core Xtensa LX7 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi (802.11 b\/g\/n), Bluetooth 5.0 LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 2 × USB-C (5 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVIN input:\u003c\/strong\u003e 5–12 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on Windows, macOS and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155646109,"sku":"B0FFLXM9KL","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/5122Ul5z-QL.jpg?v=1788828942"},{"product_id":"esp32-s3-n16r8-2-54mm-expansion-board","title":"ESP32-S3 Dev Board + 2.54mm Expansion Base","description":"\u003cp\u003eAn ESP32-S3 Gold Edition board with a 2.54 mm expansion base, for breadboard-style prototyping with ordinary jumper wires.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Male pins and female sockets on the base take any jumper wire type.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 MB flash, 8 MB PSRAM.\u003c\/strong\u003e Room for IoT, automation and data-heavy projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi and Bluetooth.\u003c\/strong\u003e 2.4 GHz Wi-Fi and Bluetooth 5.0 LE, with station, SoftAP and mixed modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-C ports.\u003c\/strong\u003e Power and program over USB-C at 5 V, or feed 5–12 V to the VIN pin. Never put more than 5 V on the USB-C ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Black PCB with lead-free ENIG (immersion gold) plating for good corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e ESP32-S3, dual-core Xtensa LX7 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi (802.11 b\/g\/n), Bluetooth 5.0 LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 2 × USB-C (5 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVIN input:\u003c\/strong\u003e 5–12 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on Windows, macOS and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155678877,"sku":"B0FNQVZJ6D","price":25.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51eBB8FAe6L.jpg?v=1788828943"},{"product_id":"esp32-s3-n16r8-dev-board-screw-terminal-base-fpc-port","title":"ESP32-S3 Dev Board + Screw Terminal Base, FPC Port","description":"\u003cp\u003eAn ESP32-S3 Gold Edition board on a pre-assembled screw terminal base with an FPC display connector, for permanent setups and field wiring.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew terminals.\u003c\/strong\u003e GPIOs break out to screw terminals that hold under vibration, with 2.54 mm female sockets alongside for jumper wires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFPC expansion.\u003c\/strong\u003e A top-mounted FPC connector adds compatible modules and displays (display sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e Headers arrive pre-soldered: seat the board on the base and start wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-C ports.\u003c\/strong\u003e Native USB and UART, for power and programming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Black PCB with lead-free ENIG (immersion gold) plating for good corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ESP32-S3 Gold Edition board (N16R8)\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal base\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × protective case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e ESP32-S3, dual-core Xtensa LX7 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi (802.11 b\/g\/n), Bluetooth 5.0 LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 2 × USB-C (native USB + UART)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on Windows, macOS and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155711645,"sku":"B0H3H3FQHL","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51yzOsGEo4L.jpg?v=1788828944"},{"product_id":"esp32-s3-n16r8-pinpulse-shield-16mb-gpio-led","title":"ESP32-S3 Gold Edition + PinPulse Shield","description":"\u003cp\u003eAn ESP32-S3 Gold Edition board with the PinPulse shield, which puts an LED on every GPIO so you can see pin states as your code runs.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 GPIO LEDs.\u003c\/strong\u003e Buffered through 74HC14D logic, so the LEDs show HIGH and LOW without loading SPI, I2C, UART or PWM signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Every GPIO has both a male pin and a female socket, taking any jumper wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e A 15-way FPC connector links Lonely Binary TFT, E-Ink and touch displays with one ribbon cable (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-C ports.\u003c\/strong\u003e One for native USB (HID, MSC, CDC), one for UART programming and debugging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ESP32-S3 Gold Edition board (N16R8)\u003c\/li\u003e\n\u003cli\u003e1 × ESP32-S3 PinPulse shield\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-S3-WROOM-1, dual-core Xtensa LX7, 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth 5.0 LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO LEDs:\u003c\/strong\u003e 36, one per GPIO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge rows:\u003c\/strong\u003e 2 × 22 pins and sockets a side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay connector:\u003c\/strong\u003e 15-way FPC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, ESP-IDF, MicroPython and PlatformIO.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155744413,"sku":"B0G6Z2GKXH","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51HZBIhclfL.jpg?v=1788828945"},{"product_id":"esp32-s3-n16r8-screw-terminal-expansion-board","title":"ESP32-S3 Dev Board + Screw Terminal Board","description":"\u003cp\u003eAn ESP32-S3 Gold Edition board with a screw terminal expansion board, for wiring that needs to stay put in permanent or fixed installations.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew terminals.\u003c\/strong\u003e GPIOs break out to screw terminals, so connections hold firm without solder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 MB flash, 8 MB PSRAM.\u003c\/strong\u003e Room for large programs, OTA updates and IoT projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi and Bluetooth.\u003c\/strong\u003e 2.4 GHz Wi-Fi and Bluetooth 5.0 LE built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-C ports.\u003c\/strong\u003e Power and program over USB-C at 5 V, or feed 5–12 V to the VIN pin. Never put more than 5 V on the USB-C ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Black PCB with lead-free ENIG (immersion gold) plating for good corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e ESP32-S3, dual-core Xtensa LX7 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi (802.11 b\/g\/n), Bluetooth 5.0 LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 2 × USB-C (5 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVIN input:\u003c\/strong\u003e 5–12 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on Windows, macOS and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155777181,"sku":"B0FNQVPBV4","price":25.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/513gjIqY0TL.jpg?v=1788828946"},{"product_id":"esp32-s3-n16r8-screwless-terminal-board","title":"ESP32-S3 Dev Board + Screwless Terminal Base","description":"\u003cp\u003eAn ESP32-S3 Gold Edition board with a push-in terminal base, so you can connect and change GPIO wiring without tools or soldering.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free terminals.\u003c\/strong\u003e Push-in terminals take wires without a screwdriver, which makes rewiring quick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 MB flash, 8 MB PSRAM.\u003c\/strong\u003e Plenty of room for large programs, OTA updates and data-heavy projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi and Bluetooth.\u003c\/strong\u003e 2.4 GHz Wi-Fi and Bluetooth 5.0 LE built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-C ports.\u003c\/strong\u003e Power and program over USB-C at 5 V, or feed 5–12 V to the VIN pin. Never put more than 5 V on the USB-C ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Black PCB with lead-free ENIG (immersion gold) plating for good corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e ESP32-S3, dual-core Xtensa LX7 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi (802.11 b\/g\/n), Bluetooth 5.0 LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 2 × USB-C (5 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVIN input:\u003c\/strong\u003e 5–12 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on Windows, macOS and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155809949,"sku":"B0FNQTPVLT","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/5175xCC2-uL.jpg?v=1788828947"},{"product_id":"uno-r3-atmega328p-board-usb-c-enig-gold","title":"UNO R3 Board USB-C, Black Gold Edition","description":"\u003cp\u003eAn UNO R3-compatible board built on the ATmega328P, with a USB-C port and a black and gold ENIG finish. A familiar starting point for learning embedded programming or for shields you already own.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard UNO R3 layout.\u003c\/strong\u003e Same pinout and footprint as the UNO R3, so existing sketches, libraries and shields carry straight over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e A reversible USB-C port replaces the old Type-B socket for power and programming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e Headers arrive pre-soldered, with every pin labelled on the silkscreen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Gold Edition.\u003c\/strong\u003e Black solder mask with lead-free ENIG plating for good solderability and oxidation resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P, 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash, 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital (6 PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower pins:\u003c\/strong\u003e 5V, 3.3V, VIN, GND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C (cable not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE and PlatformIO, and shields made for the UNO R3.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155973789,"sku":"B0FFMMVS9M","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51amppZzBdL_149a1686-2628-4c11-88ad-d3452a42098a.jpg?v=1788828951"},{"product_id":"uno-r3-atmega328p-board-usb-c-sakura-pink","title":"UNO R3 USB-C Board, Sakura Pink","description":"\u003cp\u003eAn UNO R3-compatible board with USB-C, finished in a cherry-blossom pink solder mask. The standard UNO pinout means existing code, libraries and shields work unchanged.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard UNO footprint.\u003c\/strong\u003e Same pin layout as the UNO R3, so shields and sensor modules plug straight in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e Replaces the old Type-B socket for programming and power, and plugs in either way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmersion silver finish.\u003c\/strong\u003e Good solderability and oxidation resistance; lead-free and RoHS compliant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use.\u003c\/strong\u003e Headers pre-soldered, pin names printed on the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × UNO R3 Sakura Pink board\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P, 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash, 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital pins (6 with PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rails:\u003c\/strong\u003e 5V, 3.3V, GND, VIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, PlatformIO and other UNO-compatible environments, along with existing UNO tutorials and libraries.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884156006557,"sku":"B0FJ5GWQV8","price":13.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51_2DOamrkL.jpg?v=1788828952"},{"product_id":"diy-uno-r3-kit-atmega328p-through-hole","title":"DIY UNO R3 Kit, Through-Hole Soldering","description":"\u003cp\u003eBuild your own UNO R3-compatible board from parts. Every part you solder is through-hole, which makes it a good first soldering project for students and hobbyists.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrough-hole assembly.\u003c\/strong\u003e All the parts you fit are through-hole; the surface-mount USB-to-serial chip comes already soldered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBootloader preloaded.\u003c\/strong\u003e The ATmega328P arrives with its bootloader, so you can upload code over USB as soon as it is built.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull UNO I\/O.\u003c\/strong\u003e 14 digital pins (6 PWM) and 6 analog inputs, with UART, SPI and I2C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible power.\u003c\/strong\u003e Run from USB or a 7–12 V DC supply, with a resettable polyfuse protecting the USB port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield compatible.\u003c\/strong\u003e The finished board takes standard UNO shields.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePCB with USB-to-serial chip fitted\u003c\/li\u003e\n\u003cli\u003eATmega328P with bootloader\u003c\/li\u003e\n\u003cli\u003eAll through-hole components for assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash (0.5 KB used by bootloader), 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital pins (6 with PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e USB or 7–12 V DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, with online tutorials and sample code.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471168157,"sku":"B0FJR8PP5G","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/71qd6PnQnUL._AC_SL1500.jpg?v=1789465463"},{"product_id":"esp32-1-8-lcd-dev-board-lipo-expansion-shield","title":"ESP32 1.8\" LCD Dev Board + LiPo Shield","description":"\u003cp\u003eAn ESP32 development board with a 1.8\" LCD, paired with a LiPo shield that charges a battery and powers the board, for portable Wi-Fi and Bluetooth projects.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery powered.\u003c\/strong\u003e The shield takes a 3.7 V lithium cell such as an 18650, with a power switch and charging circuit (battery not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-core ESP32.\u003c\/strong\u003e Xtensa LX6 up to 240 MHz with 4 MB flash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi and Bluetooth.\u003c\/strong\u003e 802.11 b\/g\/n Wi-Fi and Bluetooth 4.2 with BLE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C, SPI, UART and ADC.\u003c\/strong\u003e Connect sensors and modules through the shield.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Dual-core Xtensa LX6, up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth 4.2 \/ BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 1.8\" LCD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3.7 V lithium cell, not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471200925,"sku":"B0FMDKB3HZ","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/815KP8PP3jL._AC_SL1500.jpg?v=1789465463"},{"product_id":"3-pack-uno-r3-atmega328p-board-usb-c-enig-gold","title":"UNO R3 Black Gold Edition USB-C, 3-Pack","description":"\u003cp\u003eThree UNO R3-compatible boards with USB-C, a black solder mask and ENIG gold finish. The standard UNO pinout means existing code, libraries and shields work unchanged.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard UNO footprint.\u003c\/strong\u003e Same pin layout as the UNO R3, so shields and sensor modules plug straight in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e Replaces the old Type-B socket for programming and power, and plugs in either way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eENIG gold finish.\u003c\/strong\u003e Good solderability and oxidation resistance; lead-free and RoHS compliant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use.\u003c\/strong\u003e Headers pre-soldered, pin names printed on the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree boards.\u003c\/strong\u003e Enough for a small classroom station or several projects at once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × UNO R3 Black Gold Edition board\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P, 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash, 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital pins (6 with PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rails:\u003c\/strong\u003e 5V, 3.3V, GND, VIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eC++ with PlatformIO and other UNO-compatible environments, along with existing UNO tutorials and libraries.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471233693,"sku":"B0FR46DCZQ","price":37.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81-AkPvIMcL._AC_SL1500_0b5b9618-31d0-4c63-84b7-f55bed99f4c6.jpg?v=1789465464"},{"product_id":"3-pack-esp32-pinpulse-shield-gpio-led-display-port","title":"ESP32 Gold Edition + PinPulse Shield, 3-Pack","description":"\u003cp\u003eThree ESP32 Gold Edition boards, each with a PinPulse shield that puts an LED on every GPIO. A good fit for debugging, teaching and multi-board setups.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAn LED on every GPIO.\u003c\/strong\u003e 24 LEDs show HIGH and LOW in real time, driven through logic buffers so the pin sees almost no load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Every GPIO is on both male pins and female sockets at 2.54 mm, so any jumper wire fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e A 15-way FPC connector takes Lonely Binary displays on one ribbon cable, no jumper wires needed (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition boards.\u003c\/strong\u003e ESP32-WROOM-32E with a lead-free immersion gold finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32 Gold Edition board (ESP32-WROOM-32E)\u003c\/li\u003e\n\u003cli\u003e3 × ESP32 PinPulse shield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO LEDs:\u003c\/strong\u003e 24, one per GPIO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIOs at the edge:\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay connector:\u003c\/strong\u003e 15-way FPC, 1.0 mm pitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield size:\u003c\/strong\u003e 60 × 56 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eC++, MicroPython and ESP-IDF.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471266461,"sku":"B0GR4TR5C3","price":79.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81Y7WzNEEPL._AC_SL1500.jpg?v=1789465465"},{"product_id":"3-pack-esp32-wroom-32ue-with-ipex-antenna-gpio-led","title":"ESP32-WROOM-32UE IPEX + PinPulse Shield, 3-Pack","description":"\u003cp\u003eThree ESP32 Gold Edition boards built on the WROOM-32UE module, each with an external antenna and a PinPulse shield. For projects that sit in metal enclosures, behind walls or far from the router.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e An IPEX (U.FL) connector and an included 2.4 GHz antenna on each board for Wi-Fi and Bluetooth range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAn LED on every GPIO.\u003c\/strong\u003e Buffered indicator LEDs show HIGH and LOW without loading the pin, so SPI, I2C and UART keep working.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Every GPIO on the shield is on both male and female 2.54 mm headers, so any jumper wire fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e An FPC connector takes Lonely Binary displays on one ribbon cable (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eENIG gold finish.\u003c\/strong\u003e Lead-free, with good oxidation resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32-WROOM-32UE Gold Edition board\u003c\/li\u003e\n\u003cli\u003e3 × PinPulse shield\u003c\/li\u003e\n\u003cli\u003e3 × 2.4 GHz external antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32UE, dual-core Xtensa LX6 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth 4.2 (Classic and BLE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e IPEX \/ U.FL connector, external antenna included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eC++, ESP-IDF and MicroPython.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471299229,"sku":"B0GR4L326W","price":89.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81xkFG8XL7L._AC_SL1500.jpg?v=1789465466"},{"product_id":"3-pack-esp32-s3-n16r8-pinpulse-shield-16mb-gpio-led","title":"ESP32-S3 Gold Edition + PinPulse Shield, 3-Pack","description":"\u003cp\u003eThree ESP32-S3 Gold Edition boards, each with a PinPulse shield that lights an LED on every GPIO, so you can see pin states while you prototype. Suited to classroom sets and multi-node projects.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 MB flash, 8 MB PSRAM.\u003c\/strong\u003e Room for large programs, OTA updates and graphical interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAn LED on every GPIO.\u003c\/strong\u003e 36 buffered LEDs show HIGH and LOW without disturbing SPI, I2C or UART.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Every GPIO is on both male pins and female sockets at 2.54 mm, so any jumper wire fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e A 15-pin FPC connector takes Lonely Binary displays on one ribbon cable (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-C ports.\u003c\/strong\u003e One for native USB, one for UART programming and debugging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32-S3 Gold Edition board (N16R8)\u003c\/li\u003e\n\u003cli\u003e3 × ESP32-S3 PinPulse shield\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-S3-WROOM-1, dual-core Xtensa LX7 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16 MB flash, 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth 5 LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO LEDs:\u003c\/strong\u003e 36, one per GPIO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay connector:\u003c\/strong\u003e 15-way FPC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eC++, ESP-IDF, MicroPython and PlatformIO.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471331997,"sku":"B0G71PC5S8","price":99.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/71Ofk94m7pL._AC_SL1500.jpg?v=1789465466"},{"product_id":"3-pack-nano-v3-0-atmega328p-usb-c-3-expansion-bases","title":"Nano V3.0 USB-C + 3 Expansion Bases, 3-Pack","description":"\u003cp\u003eThree Nano V3.0 boards with USB-C, plus three different expansion bases so you can wire each project the way it suits: pins, push-in terminals or screw terminals.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C on every board.\u003c\/strong\u003e Reversible USB-C for programming and power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree styles of base.\u003c\/strong\u003e A 2.54 mm pin breakout, a push-button terminal base and a screw terminal base, so no soldering is needed to make connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free or secure.\u003c\/strong\u003e Push-button terminals take a wire without tools for quick prototyping; screw terminals hold wires firmly for longer-term builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e The 2.54 mm base has both male and female GPIO headers, so standard Dupont jumper wires fit either way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreadboard friendly.\u003c\/strong\u003e The Nano's pin spacing fits a standard breadboard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × Nano V3.0 board (ATmega328P, USB-C)\u003c\/li\u003e\n\u003cli\u003e1 × 2.54 mm pin breakout base\u003c\/li\u003e\n\u003cli\u003e1 × push-button (non-screw) terminal base\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal base\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeader pitch:\u003c\/strong\u003e 2.54 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eProgrammable in C++ with the usual Nano toolchains, libraries and examples.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471397533,"sku":"B0FL73HVXG","price":39.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/9145Yr4OHIL._AC_SL1500.jpg?v=1789465468"}],"url":"https:\/\/lonelybinary.com\/en-eu\/collections\/boards.oembed?page=2","provider":"Lonely Binary","version":"1.0","type":"link"}