{"title":"Display","description":"","products":[{"product_id":"st7576","title":"2.8\" 128x64 Graphic LCD","description":"\u003cp\u003eA 2.8\" dot-matrix graphic LCD with a 128 × 64 pixel grid, for showing text and simple graphics in your projects.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDot-matrix display.\u003c\/strong\u003e A full pixel grid, so it draws graphics as well as characters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge viewing area.\u003c\/strong\u003e A 2.8\" display in a compact module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArduino library support.\u003c\/strong\u003e Drive it from existing Arduino libraries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2.8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 128 × 64\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dot-matrix LCD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino-compatible boards, using existing Arduino libraries.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":45121033994397,"sku":"LCD-ST7576-2D8","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/LCD-ST7576-2D8-02.jpg?v=1713756296"},{"product_id":"12-pack-10-segment-led-bar-graph-6-colours","title":"10-Segment LED Bar Graph, 6 Colours, 12-Pack","description":"\u003cp\u003eA kit of twelve 10-segment LED bar graphs with matching resistor boards and printed frames. For level meters, battery gauges and signal bars.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix colours.\u003c\/strong\u003e Two each of red, yellow, green, blue, white and multicolour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistors on a board.\u003c\/strong\u003e Each bar has its own resistor board with ten 220Ω resistors, so no loose resistors to wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreadboard pitch.\u003c\/strong\u003e Standard 2.54mm spacing; header strips are supplied loose for the resistor boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted frames.\u003c\/strong\u003e Each bar fits a 3D-printed frame for a finished look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne pin per segment.\u003c\/strong\u003e Each bar uses ten GPIO pins, one per segment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 × 10-segment bar graph: 2 each of red, yellow, green, blue, white and multicolour\u003c\/li\u003e\n\u003cli\u003e12 × current-limiting resistor board, ten 220Ω each, no pins fitted\u003c\/li\u003e\n\u003cli\u003e12 × printed frame\u003c\/li\u003e\n\u003cli\u003eMale pin header strips for the resistor boards\u003c\/li\u003e\n\u003cli\u003e1 × storage case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSegments:\u003c\/strong\u003e 10 per bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries resistor:\u003c\/strong\u003e 220Ω per segment, fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch:\u003c\/strong\u003e 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino-compatible boards, ESP32 and other microcontrollers with enough free GPIO.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884154433693,"sku":"B0GR4PS5S7","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51AjSp6fB_L.jpg?v=1788828911"},{"product_id":"24-pack-0-56-7-segment-led-74hc595-driver","title":"0.56\" 7-Segment LED + 74HC595 Driver, 24-Pack","description":"\u003cp\u003eA seven-segment display kit: 24 single digits and 12 shift-register driver boards with the resistors already fitted. For clocks, counters, timers and meters.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 digits, two kinds.\u003c\/strong\u003e 12 common-cathode and 12 common-anode 0.56-inch red digits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistors fitted.\u003c\/strong\u003e Each 74HC595 driver board carries its eight series resistors, so no loose resistors to wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree wires for any length.\u003c\/strong\u003e Daisy-chain the driver boards and drive every digit from Data, Clock and Latch. Works with the Arduino shiftOut() function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap-on enclosures.\u003c\/strong\u003e Each digit gets a printed frame and smoked film for a finished look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnow the limit.\u003c\/strong\u003e The 74HC595 is rated to 70mA across the whole chip, which matters when every segment is lit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 × 74HC595 driver board, eight series resistors fitted\u003c\/li\u003e\n\u003cli\u003e12 × common-cathode digit (5161AS)\u003c\/li\u003e\n\u003cli\u003e12 × common-anode digit (5161BS)\u003c\/li\u003e\n\u003cli\u003e24 × snap-on enclosure: printed frame and smoked film\u003c\/li\u003e\n\u003cli\u003eMale pin header strips for the driver boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigit size:\u003c\/strong\u003e 0.56 inch, red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e 74HC595 shift register\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e Data, Clock, Latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip current:\u003c\/strong\u003e 70mA maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE boards, ESP32, ESP32-S3, Raspberry Pi Pico and STM32.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884154826909,"sku":"B0GR4HCTRW","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51ljoytMs9L.jpg?v=1788828921"},{"product_id":"3-pack-1602-lcd-display-module-i2c-16x2-blue","title":"1602 I2C LCD Display 16x2, Blue, 3-Pack","description":"\u003cp\u003eClassic 16x2 character LCDs with the I2C controller built onto the board, so each one needs only four wires. Three displays with front bezels.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C on board.\u003c\/strong\u003e The PCF8574T sits on the display PCB itself, not on a stacked adapter, keeping the module 12mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo soldering.\u003c\/strong\u003e The 4-pin header (VCC, GND, SDA, SCK) is fitted at the factory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo signal pins.\u003c\/strong\u003e Only SDA and SCK, leaving the rest of your GPIO free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree on one bus.\u003c\/strong\u003e The A0–A2 pads change the address from the default 0x27, so all three can share a bus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished look.\u003c\/strong\u003e Snap-on black bezels hide the PCB edge for panel mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × 1602 I2C LCD display, 16x2 blue\u003c\/li\u003e\n\u003cli\u003e3 × snap-on black front bezel\u003c\/li\u003e\n\u003cli\u003e1 × mini screwdriver for the contrast trimmer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharacters:\u003c\/strong\u003e 16 × 2, white on blue backlight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e PCF8574T I2C expander\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefault address:\u003c\/strong\u003e 0x27\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eAny board with I2C. With 3.3V boards, a level shifter on SDA and SCK is recommended. If the screen looks blank at first power-up, turn the contrast trimmer.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884154892445,"sku":"B0HBMZS8Y7","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51wviA6qtqL.jpg?v=1788828923"},{"product_id":"3-pack-32x8-led-matrix-max7219-3-colours","title":"32x8 LED Matrix MAX7219, 3 Colours, 3-Pack","description":"\u003cp\u003eThree 32x8 LED matrix displays, one each in red, green and blue, with colour-matched 3D-printed cases. Wide enough for scrolling messages, clocks and scoreboards.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne colour each.\u003c\/strong\u003e Red, green and blue modules, 256 LEDs apiece; each module is a single fixed colour, not RGB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree signal wires.\u003c\/strong\u003e DIN, CLK and CS drive the whole display, plus power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascadable.\u003c\/strong\u003e Chain DOUT to DIN to build 64x8, 96x8 or wider.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable brightness.\u003c\/strong\u003e 16 levels set in code, with a low-power shutdown mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCases included.\u003c\/strong\u003e Each module ships with a colour-matched 3D-printed PLA case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × 32x8 MAX7219 LED matrix module, one each in red, green and blue\u003c\/li\u003e\n\u003cli\u003e3 × 3D-printed case, colour-matched\u003c\/li\u003e\n\u003cli\u003e1 × long male pin header strip\u003c\/li\u003e\n\u003cli\u003e3 × female header socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 32x8 (256 LEDs) per module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e MAX7219\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e SPI: DIN, CLK, CS, plus DOUT for chaining\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eProgrammable from the Arduino IDE, MicroPython and CircuitPython on any board with SPI. Sample code is on the Lonely Binary GitHub.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884154925213,"sku":"B0GTQFCF2V","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51rI9v1_unL.jpg?v=1788828924"},{"product_id":"3-pack-8x8-led-matrix-max7219-3-colours","title":"8x8 LED Matrix MAX7219, 3 Colours, 3-Pack","description":"\u003cp\u003eThree chainable 8x8 LED matrix modules, one each in red, green and blue, with colour-matched 3D-printed cases. For scrolling text, simple games and status displays.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne colour each.\u003c\/strong\u003e Red, green and blue modules, 64 LEDs apiece; each module is a single fixed colour, not RGB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree signal wires.\u003c\/strong\u003e The MAX7219 driver takes DIN, CLK and CS, plus power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChainable.\u003c\/strong\u003e DOUT feeds the next module's DIN, so three make a 24x8 display. Soldering headers is required to link them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable brightness.\u003c\/strong\u003e 16 brightness levels set in code, plus a low-power shutdown mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCases included.\u003c\/strong\u003e Each module gets a colour-matched 3D-printed PLA case, so no bare PCB shows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × chainable 8x8 MAX7219 LED matrix module, one each in red, green and blue\u003c\/li\u003e\n\u003cli\u003e3 × 3D-printed case, colour-matched\u003c\/li\u003e\n\u003cli\u003e3 × 6-way female header socket\u003c\/li\u003e\n\u003cli\u003e1 × long male pin header strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 8x8 (64 LEDs) per module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e MAX7219\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e SPI: DIN, CLK, CS, plus DOUT for chaining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule size:\u003c\/strong\u003e 3.2 × 3.2 × 1 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eProgrammable from the Arduino IDE, MicroPython and CircuitPython on any board with SPI. Sample code is on the Lonely Binary GitHub.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884154957981,"sku":"B0GYRTNQZ3","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51CmzwGtSFL.jpg?v=1788828925"},{"product_id":"4-7-segment-led-display-74hc595","title":"4-Inch 7-Segment LED Display, 74HC595, 2-Pack","description":"\u003cp\u003eTwo jumbo 4-inch single-digit seven-segment displays with a 74HC595 driver board on the back, so a microcontroller can run 12 V segments from 3.3 V or 5 V logic.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReadable at a distance.\u003c\/strong\u003e 4-inch digits for scoreboards, timers and wall clocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver built in.\u003c\/strong\u003e The back board switches the 12 V segments, with no transistor arrays to build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChainable.\u003c\/strong\u003e Daisy-chain modules for multi-digit displays on the same data, clock and latch lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSample code.\u003c\/strong\u003e Examples on Lonely Binary's GitHub.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 × 4-inch single-digit display module, each with the 74HC595 driver board on the back\u003c\/li\u003e\n\u003cli\u003eMale pin header strip, to cut down for the IN and OUT rows\u003c\/li\u003e\n\u003cli\u003eFemale sockets in two sizes, 5-way for the signal row and 2-way for the 12 V row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigit height:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSegment supply:\u003c\/strong\u003e 12 V, separate supply (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogic supply:\u003c\/strong\u003e 3.3 or 5 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWires to your board:\u003c\/strong\u003e 5, including GND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e 74HC595\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino, ESP32, ESP32-S3, Raspberry Pi Pico, STM32 and other microcontrollers. A controller board and 12 V supply are not included.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155285661,"sku":"B0GR4NRRQP","price":41.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51PgWs0VhUL.jpg?v=1788828933"},{"product_id":"6-pack-tm1637-4-digit-0-56-led-display","title":"TM1637 4-Digit Decimal LED Display, 6-Pack","description":"\u003cp\u003eSix 0.56-inch four-digit seven-segment displays, one in each of six colours, each with a decimal point after every digit. They run from two signal wires, which makes them an easy numeric readout for counters, timers and sensor projects.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix colours.\u003c\/strong\u003e One each of yellow, green, blue, white, orange and red; each display is a single colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo signal wires.\u003c\/strong\u003e The TM1637 driver needs only CLOCK and DATA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeveral on one board.\u003c\/strong\u003e Share the CLOCK line and give each display its own DATA pin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished look.\u003c\/strong\u003e Every display comes with a 3D-printed enclosure and a smoked film cover to cut glare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 × 4-digit display with decimal points, one each in yellow, green, blue, white, orange and red\u003c\/li\u003e\n\u003cli\u003e6 × 3D-printed enclosure\u003c\/li\u003e\n\u003cli\u003e6 × smoked film cover\u003c\/li\u003e\n\u003cli\u003e1 × storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e TM1637\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigit height:\u003c\/strong\u003e 0.56 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigits:\u003c\/strong\u003e 4, with decimal points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 5 V, or 3.3 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal wires:\u003c\/strong\u003e 2 (CLOCK, DATA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino, ESP32 and other microcontrollers with a TM1637 library. Boards and cables are sold separately.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155416733,"sku":"B0G7234Z1N","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51m93_OEFTL.jpg?v=1788828936"},{"product_id":"max7219-vintage-tube-led-clock-kit","title":"MAX7219 Vintage Tube LED Clock Kit","description":"\u003cp\u003eEight-digit MAX7219 LED displays that sit inside glass tubes, for retro-style clocks, counters and readouts.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree ready, three to build.\u003c\/strong\u003e Three finished eight-digit displays plus three bare driver boards and six four-digit panels to pair up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix colours and styles.\u003c\/strong\u003e Each driver runs two 0.28-inch four-digit panels as one eight-digit display, in red or blue, with decimal points or a colon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlow-tube look, low voltage.\u003c\/strong\u003e Slide a display into a tube and lay the diffusion sheet over the digits to soften the light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × eight-digit display built into a glass tube: red with decimal points, blue with decimal points, red with a colon\u003c\/li\u003e\n\u003cli\u003e6 × loose four-digit 0.28-inch panel: 2 red with decimal points, 2 red with a colon, 2 blue with decimal points\u003c\/li\u003e\n\u003cli\u003e3 × MAX7219 driver board, no pins fitted\u003c\/li\u003e\n\u003cli\u003e6 × glass tube with a cork stopper\u003c\/li\u003e\n\u003cli\u003e1 × black diffusion sheet\u003c\/li\u003e\n\u003cli\u003e2 × 40-pin male header strip\u003c\/li\u003e\n\u003cli\u003e30 × jumper lead, 150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e MAX7219, 8 digits per display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e DIN, CLK, CS (3 signal wires + power)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 4.0–5.5 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigit size:\u003c\/strong\u003e 0.28 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and CircuitPython. Sample code is on the Lonely Binary GitHub.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155875485,"sku":"B0GYS6B5NB","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/518B3C7mPXL.jpg?v=1788828949"},{"product_id":"6-pack-spi-tft-lcd-display-kit-0-96-3-5","title":"SPI TFT Display Kit 0.96\"–3.5\", 6-Pack","description":"\u003cp\u003eSix colour SPI TFT displays from 0.96\" to 3.5\" with the same connector, so you can try every size on your project.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame connector on every panel.\u003c\/strong\u003e A pre-soldered 15-pin FPC plugs into Lonely Binary boards such as the PinPulse shield (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOr use jumper wires.\u003c\/strong\u003e Solder on the included headers for breadboard or Dupont wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.3 V logic only.\u003c\/strong\u003e A 5 V board such as an UNO needs a logic level converter on the signal lines, or it will damage the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 × SPI TFT display: 0.96\", 1.8\", 2.0\", 2.4\", 2.8\" and 3.5\"\u003c\/li\u003e\n\u003cli\u003e9 × 15-way FPC ribbon cable, in three lengths\u003c\/li\u003e\n\u003cli\u003e2 × straight breakaway male header strip\u003c\/li\u003e\n\u003cli\u003e2 × right-angle breakaway male header strip\u003c\/li\u003e\n\u003cli\u003e1 × hinged storage case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControllers:\u003c\/strong\u003e ST7735 (0.96\", 1.8\"), ST7789 (2.0\", 2.4\", 2.8\"), ST7796 (3.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 240 × 320 on the 2.0\", 2.4\" and 2.8\"; 320 × 480 on the 3.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogic level:\u003c\/strong\u003e 3.3 V only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eESP32, ESP32-S3, Raspberry Pi Pico and other 3.3 V boards, with the Lonely Binary Display library, TFT_eSPI or Adafruit GFX in the Arduino IDE, or MicroPython st7789\/st7735 drivers.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471004317,"sku":"B0GR4HRVV2","price":90.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81-ZeabApDL._AC_SL1500.jpg?v=1789465458"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/collections\/classic.png?v=1614957827","url":"https:\/\/lonelybinary.com\/en-eu\/collections\/display.oembed","provider":"Lonely Binary","version":"1.0","type":"link"}