{"title":"ESP32 \u0026 ESP32-C3","description":null,"products":[{"product_id":"3-pack-esp32-c3-oled-wifi-ble-lipo-shield","title":"ESP32-C3 OLED Dev Board + LiPo Shield, 3-Pack","description":"\u003cp\u003eTiny ESP32-C3 boards with a built-in OLED screen, plus three expansion shields that add a LiPo battery port. For battery-powered sensors and small connected devices.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen on board.\u003c\/strong\u003e A 0.42-inch 72 × 40 OLED is already wired, handy for readings and debugging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi and Bluetooth LE.\u003c\/strong\u003e ESP32-C3 RISC-V chip at up to 160MHz with 4MB flash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup.\u003c\/strong\u003e With USB-C connected the shield runs the board and charges the battery; unplug it and the battery takes over without a reboot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree shield styles.\u003c\/strong\u003e 2.54mm expansion, screw terminal and non-screw terminal, each with a LiPo port and a regulated 3.3V supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery monitoring.\u003c\/strong\u003e Short the monitor pads to read the battery voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32-C3 OLED development board\u003c\/li\u003e\n\u003cli\u003e1 × 2.54mm expansion shield with LiPo battery port\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal shield with LiPo battery port\u003c\/li\u003e\n\u003cli\u003e1 × non-screw terminal shield with LiPo battery port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e ESP32-C3FH4, single-core RISC-V, up to 160MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 4MB flash, 400kB SRAM, no PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 0.42 in, 72 × 40, SH1106 at 0x3C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard size:\u003c\/strong\u003e 25 × 20.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, ESP-IDF and MicroPython. Contents shown are for the 3-pack set; LiPo batteries and jumper wires are sold separately.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"3-Pack Set","offer_id":48759354294429,"sku":null,"price":54.99,"currency_code":"AUD","in_stock":true},{"title":"OLED Board","offer_id":48759354327197,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true},{"title":"Screw Terminal Board","offer_id":48759354359965,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true},{"title":"Screwless Terminal Board","offer_id":48759354392733,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true},{"title":"Expansion Board","offer_id":48759354425501,"sku":null,"price":14.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81LQd06CrUL._AC_SL1500.jpg?v=1786085087"},{"product_id":"3-pack-esp32-dev-board-lipo-ups-charger-shields","title":"ESP32 LiPo Dev Board + 3 Shields, 3-Pack","description":"\u003cp\u003eThree ESP32 boards with a built-in LiPo charger that keeps your program running when USB-C is unplugged, plus three shields.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps running off USB.\u003c\/strong\u003e The power path runs the board from USB while the battery charges, then switches to the battery without a reset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 mA charger.\u003c\/strong\u003e For a single-cell 3.7 V LiPo or protected 18650 on the JST-PH 2.0 port (battery not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery monitoring.\u003c\/strong\u003e Bridge the BATTERY MONITOR pads on a shield to read the battery on IO36 through a 1:2 divider.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree shields.\u003c\/strong\u003e 2.54 mm header, spring terminal and screw terminal, each with its own on\/off switch and fully assembled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolder the headers.\u003c\/strong\u003e Header strips ship unfitted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32 LiPo board (header strips not fitted)\u003c\/li\u003e\n\u003cli\u003e3 × shield: 2.54 mm header, spring terminal, screw terminal\u003c\/li\u003e\n\u003cli\u003e6 × JST PH 2.0 cable\u003c\/li\u003e\n\u003cli\u003e6 × male header strip\u003c\/li\u003e\n\u003cli\u003e1 × storage case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C, CH340 serial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e 500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3.7 V, one cell, JST-PH 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, MicroPython and ESP-IDF on macOS, Windows and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155056285,"sku":"B0H6FT575J","price":41.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/513ASckpTiL.jpg?v=1788828927"},{"product_id":"3-pack-esp32-gold-edition-3-expansion-bases","title":"ESP32 Gold Edition + 3 Bases, 3-Pack","description":"\u003cp\u003eThree ESP32 Gold Edition boards with header pins fitted, plus one each of the expansion, pluggable terminal and screw terminal bases. For home automation, wireless sensors and learning the ESP32.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-WROOM-32E.\u003c\/strong\u003e Dual-core with built-in Wi-Fi and Bluetooth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree ways to wire.\u003c\/strong\u003e A 2.54 mm expansion base with male and female headers, a tool-free pluggable terminal base, and a screw terminal base for permanent installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e The boards plug straight into every base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB status LED.\u003c\/strong\u003e A WS2812 on GPIO2 for visual feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Lead-free immersion gold plating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32 Gold Edition board (ESP32-WROOM-32E), header pins fitted\u003c\/li\u003e\n\u003cli\u003e1 × expansion base (2.54 mm)\u003c\/li\u003e\n\u003cli\u003e1 × pluggable terminal base\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal base\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard LED:\u003c\/strong\u003e WS2812 RGB on GPIO2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C, power and data\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE and other ESP32 toolchains on macOS and Windows.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155089053,"sku":"B0FR3GVRD5","price":41.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/511RJyJCFNL.jpg?v=1788828928"},{"product_id":"3-pack-esp32-ipex-antenna-3-expansion-bases","title":"ESP32 IPEX Antenna Edition + 3 Bases, 3-Pack","description":"\u003cp\u003eThree ESP32 boards with an external IPEX antenna, plus one each of the expansion, pluggable terminal and screw terminal bases. For wireless projects that live inside a box.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e Place the IPEX antenna outside an enclosure for longer Wi-Fi and Bluetooth range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree ways to wire.\u003c\/strong\u003e A 2.54 mm expansion base with male and female headers, a tool-free pluggable terminal base, and a screw terminal base for permanent installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e The boards plug straight into every base, no soldering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB status LED.\u003c\/strong\u003e A WS2812 on GPIO2 for visual feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e For power and programming; a cable is included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32 board, IPEX antenna edition, headers fitted\u003c\/li\u003e\n\u003cli\u003e1 × 2.54mm expansion base\u003c\/li\u003e\n\u003cli\u003e1 × pluggable terminal base\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal base\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × storage container\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard LED:\u003c\/strong\u003e WS2812 RGB on GPIO2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Lead-free immersion gold (ENIG)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE and other ESP32 toolchains on macOS, Windows and Linux.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155121821,"sku":"B0FRXZD6VC","price":48.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51v6iStztmL.jpg?v=1788828929"},{"product_id":"esp32-wroom-32ue-ipex-antenna-gpio-led","title":"ESP32 Gold Edition + PinPulse Shield, IPEX Antenna","description":"\u003cp\u003eAn ESP32-WROOM-32UE board with an external IPEX antenna, mounted on the PinPulse shield with an LED on every GPIO. Suited to IoT devices inside metal enclosures, behind walls or far from the router.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e An IPEX (U.FL) connector and the included 2.4 GHz antenna extend Wi-Fi and Bluetooth range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO LEDs.\u003c\/strong\u003e Each GPIO has an LED buffered through 74HC14D logic, showing HIGH and LOW without disturbing SPI, I2C, UART or PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Every GPIO has a male pin and a female socket, taking any jumper wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e An FPC connector links Lonely Binary TFT, E-Ink and touch displays with one ribbon cable (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Edition finish.\u003c\/strong\u003e Lead-free ENIG plating for good oxidation resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ESP32 Gold Edition board (ESP32-WROOM-32UE)\u003c\/li\u003e\n\u003cli\u003e1 × PinPulse shield\u003c\/li\u003e\n\u003cli\u003e1 × 2.4 GHz IPEX antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32UE, dual-core Xtensa LX6, 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth Classic + BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e External, IPEX \/ U.FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, ESP-IDF and MicroPython.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155613341,"sku":"B0GR4Q23JV","price":31.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51yRqWBHv8L.jpg?v=1788828941"},{"product_id":"esp32-1-8-lcd-dev-board-lipo-expansion-shield","title":"ESP32 1.8\" LCD Dev Board + LiPo Shield","description":"\u003cp\u003eAn ESP32 development board with a 1.8\" LCD, paired with a LiPo shield that charges a battery and powers the board, for portable Wi-Fi and Bluetooth projects.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery powered.\u003c\/strong\u003e The shield takes a 3.7 V lithium cell such as an 18650, with a power switch and charging circuit (battery not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-core ESP32.\u003c\/strong\u003e Xtensa LX6 up to 240 MHz with 4 MB flash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi and Bluetooth.\u003c\/strong\u003e 802.11 b\/g\/n Wi-Fi and Bluetooth 4.2 with BLE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C, SPI, UART and ADC.\u003c\/strong\u003e Connect sensors and modules through the shield.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Dual-core Xtensa LX6, up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth 4.2 \/ BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 1.8\" LCD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3.7 V lithium cell, not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471200925,"sku":"B0FMDKB3HZ","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/815KP8PP3jL._AC_SL1500.jpg?v=1789465463"},{"product_id":"3-pack-esp32-wroom-32ue-with-ipex-antenna-gpio-led","title":"ESP32-WROOM-32UE IPEX + PinPulse Shield, 3-Pack","description":"\u003cp\u003eThree ESP32 Gold Edition boards built on the WROOM-32UE module, each with an external antenna and a PinPulse shield. For projects that sit in metal enclosures, behind walls or far from the router.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna.\u003c\/strong\u003e An IPEX (U.FL) connector and an included 2.4 GHz antenna on each board for Wi-Fi and Bluetooth range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAn LED on every GPIO.\u003c\/strong\u003e Buffered indicator LEDs show HIGH and LOW without loading the pin, so SPI, I2C and UART keep working.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e Every GPIO on the shield is on both male and female 2.54 mm headers, so any jumper wire fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay port.\u003c\/strong\u003e An FPC connector takes Lonely Binary displays on one ribbon cable (displays sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eENIG gold finish.\u003c\/strong\u003e Lead-free, with good oxidation resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × ESP32-WROOM-32UE Gold Edition board\u003c\/li\u003e\n\u003cli\u003e3 × PinPulse shield\u003c\/li\u003e\n\u003cli\u003e3 × 2.4 GHz external antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-WROOM-32UE, dual-core Xtensa LX6 up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Wi-Fi 802.11 b\/g\/n, Bluetooth 4.2 (Classic and BLE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e IPEX \/ U.FL connector, external antenna included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eC++, ESP-IDF and MicroPython.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471299229,"sku":"B0GR4L326W","price":89.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81xkFG8XL7L._AC_SL1500.jpg?v=1789465466"}],"url":"https:\/\/lonelybinary.com\/en-eu\/collections\/esp32-c3.oembed","provider":"Lonely Binary","version":"1.0","type":"link"}