{"title":"UNO \u0026 Nano","description":null,"products":[{"product_id":"3-pack-nano-v3-0-atmega328p-usb-c-pinpulse-led-shield","title":"Nano V3.0 USB-C + PinPulse LED Shield, 3-Pack","description":"\u003cp\u003eThree ATmega328P Nano V3.0 boards with USB-C, plus a PinPulse shield that puts a status LED on every I\/O pin. For learning Arduino and debugging circuits at a glance.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSee every pin.\u003c\/strong\u003e The PinPulse shield shows HIGH or LOW on TX\/RX, D2 to D13 and A0 to A7.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuffered LEDs.\u003c\/strong\u003e SN74HC04D inverters drive the LEDs, keeping the load off your I2C, SPI and UART signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale and female on every pin.\u003c\/strong\u003e Dual 2.54 mm headers take any jumper wire type.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e A reversible connector on every Nano.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArduino IDE compatible.\u003c\/strong\u003e Existing Nano sketches, libraries and shields work as they are.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × Nano V3.0 board, USB-C\u003c\/li\u003e\n\u003cli\u003e1 × PinPulse shield\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × printed quick-start card (CH340 driver and Arduino IDE setup)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P at 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 32 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSRAM:\u003c\/strong\u003e 2 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEEPROM:\u003c\/strong\u003e 1 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital I\/O:\u003c\/strong\u003e 14, 6 with PWM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB serial:\u003c\/strong\u003e CH340\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE. Sensor and display modules shown in photos are not included.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155252893,"sku":"B0H9PZD7VF","price":41.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51aWn969QpL.jpg?v=1788828932"},{"product_id":"uno-r3-atmega328p-board-usb-c-enig-gold","title":"UNO R3 Board USB-C, Black Gold Edition","description":"\u003cp\u003eAn UNO R3-compatible board built on the ATmega328P, with a USB-C port and a black and gold ENIG finish. A familiar starting point for learning embedded programming or for shields you already own.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard UNO R3 layout.\u003c\/strong\u003e Same pinout and footprint as the UNO R3, so existing sketches, libraries and shields carry straight over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e A reversible USB-C port replaces the old Type-B socket for power and programming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeaders fitted.\u003c\/strong\u003e Headers arrive pre-soldered, with every pin labelled on the silkscreen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Gold Edition.\u003c\/strong\u003e Black solder mask with lead-free ENIG plating for good solderability and oxidation resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P, 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash, 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital (6 PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower pins:\u003c\/strong\u003e 5V, 3.3V, VIN, GND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C (cable not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE and PlatformIO, and shields made for the UNO R3.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884155973789,"sku":"B0FFMMVS9M","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51amppZzBdL_149a1686-2628-4c11-88ad-d3452a42098a.jpg?v=1788828951"},{"product_id":"uno-r3-atmega328p-board-usb-c-sakura-pink","title":"UNO R3 USB-C Board, Sakura Pink","description":"\u003cp\u003eAn UNO R3-compatible board with USB-C, finished in a cherry-blossom pink solder mask. The standard UNO pinout means existing code, libraries and shields work unchanged.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard UNO footprint.\u003c\/strong\u003e Same pin layout as the UNO R3, so shields and sensor modules plug straight in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e Replaces the old Type-B socket for programming and power, and plugs in either way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmersion silver finish.\u003c\/strong\u003e Good solderability and oxidation resistance; lead-free and RoHS compliant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use.\u003c\/strong\u003e Headers pre-soldered, pin names printed on the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × UNO R3 Sakura Pink board\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P, 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash, 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital pins (6 with PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rails:\u003c\/strong\u003e 5V, 3.3V, GND, VIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, PlatformIO and other UNO-compatible environments, along with existing UNO tutorials and libraries.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48884156006557,"sku":"B0FJ5GWQV8","price":13.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/51_2DOamrkL.jpg?v=1788828952"},{"product_id":"diy-uno-r3-kit-atmega328p-through-hole","title":"DIY UNO R3 Kit, Through-Hole Soldering","description":"\u003cp\u003eBuild your own UNO R3-compatible board from parts. Every part you solder is through-hole, which makes it a good first soldering project for students and hobbyists.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrough-hole assembly.\u003c\/strong\u003e All the parts you fit are through-hole; the surface-mount USB-to-serial chip comes already soldered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBootloader preloaded.\u003c\/strong\u003e The ATmega328P arrives with its bootloader, so you can upload code over USB as soon as it is built.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull UNO I\/O.\u003c\/strong\u003e 14 digital pins (6 PWM) and 6 analog inputs, with UART, SPI and I2C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible power.\u003c\/strong\u003e Run from USB or a 7–12 V DC supply, with a resettable polyfuse protecting the USB port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield compatible.\u003c\/strong\u003e The finished board takes standard UNO shields.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePCB with USB-to-serial chip fitted\u003c\/li\u003e\n\u003cli\u003eATmega328P with bootloader\u003c\/li\u003e\n\u003cli\u003eAll through-hole components for assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash (0.5 KB used by bootloader), 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital pins (6 with PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e USB or 7–12 V DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eArduino IDE, with online tutorials and sample code.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471168157,"sku":"B0FJR8PP5G","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/71qd6PnQnUL._AC_SL1500.jpg?v=1789465463"},{"product_id":"3-pack-uno-r3-atmega328p-board-usb-c-enig-gold","title":"UNO R3 Black Gold Edition USB-C, 3-Pack","description":"\u003cp\u003eThree UNO R3-compatible boards with USB-C, a black solder mask and ENIG gold finish. The standard UNO pinout means existing code, libraries and shields work unchanged.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard UNO footprint.\u003c\/strong\u003e Same pin layout as the UNO R3, so shields and sensor modules plug straight in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C.\u003c\/strong\u003e Replaces the old Type-B socket for programming and power, and plugs in either way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eENIG gold finish.\u003c\/strong\u003e Good solderability and oxidation resistance; lead-free and RoHS compliant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use.\u003c\/strong\u003e Headers pre-soldered, pin names printed on the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree boards.\u003c\/strong\u003e Enough for a small classroom station or several projects at once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × UNO R3 Black Gold Edition board\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P, 16 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 32 KB flash, 2 KB SRAM, 1 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 14 digital pins (6 with PWM), 6 analog inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rails:\u003c\/strong\u003e 5V, 3.3V, GND, VIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eC++ with PlatformIO and other UNO-compatible environments, along with existing UNO tutorials and libraries.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471233693,"sku":"B0FR46DCZQ","price":37.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/81-AkPvIMcL._AC_SL1500_0b5b9618-31d0-4c63-84b7-f55bed99f4c6.jpg?v=1789465464"},{"product_id":"3-pack-nano-v3-0-atmega328p-usb-c-3-expansion-bases","title":"Nano V3.0 USB-C + 3 Expansion Bases, 3-Pack","description":"\u003cp\u003eThree Nano V3.0 boards with USB-C, plus three different expansion bases so you can wire each project the way it suits: pins, push-in terminals or screw terminals.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C on every board.\u003c\/strong\u003e Reversible USB-C for programming and power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree styles of base.\u003c\/strong\u003e A 2.54 mm pin breakout, a push-button terminal base and a screw terminal base, so no soldering is needed to make connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free or secure.\u003c\/strong\u003e Push-button terminals take a wire without tools for quick prototyping; screw terminals hold wires firmly for longer-term builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins and sockets.\u003c\/strong\u003e The 2.54 mm base has both male and female GPIO headers, so standard Dupont jumper wires fit either way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreadboard friendly.\u003c\/strong\u003e The Nano's pin spacing fits a standard breadboard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × Nano V3.0 board (ATmega328P, USB-C)\u003c\/li\u003e\n\u003cli\u003e1 × 2.54 mm pin breakout base\u003c\/li\u003e\n\u003cli\u003e1 × push-button (non-screw) terminal base\u003c\/li\u003e\n\u003cli\u003e1 × screw terminal base\u003c\/li\u003e\n\u003cli\u003e1 × USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATmega328P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeader pitch:\u003c\/strong\u003e 2.54 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eProgrammable in C++ with the usual Nano toolchains, libraries and examples.\u003c\/p\u003e","brand":"Lonely Binary","offers":[{"title":"Default Title","offer_id":48910471397533,"sku":"B0FL73HVXG","price":39.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/9994\/7908\/files\/9145Yr4OHIL._AC_SL1500.jpg?v=1789465468"}],"url":"https:\/\/lonelybinary.com\/en-nz\/collections\/uno-nano.oembed","provider":"Lonely Binary","version":"1.0","type":"link"}