Project - Smart Sunrise Alarm
In this project, we’re going to design a smart sunrise alarm that uses a light-dependent resistor (LDR) and an active buzzer. This clever alarm will detect the first light of...
Lonely Binary |
Tutorial
Project - Smart Sunrise Alarm
-
Photoresistor Sensor
A **photoresistor** (also known as a **light-dependent resistor** or **LDR**) is a type of resistor whose resistance decreases as the intensity of light hitting the device increases. It is made...
Lonely Binary |
-
Project - Temperature Measurement
# Project - Temperature Measurement To use an NTC thermistor with the Lonely Binary UNO R3, you need to connect it in a **voltage divider** configuration. Here’s how you can...
Lonely Binary |
-
NTC Temperature Sensor
An **NTC (Negative Temperature Coefficient) sensor** is a type of temperature sensor whose resistance decreases as the temperature increases. This behavior is the opposite of a **PTC (Positive Temperature Coefficient)**...
Lonely Binary |
-
Project - IR Sender
# Project - IR Sender In the previous project, we learned how to capture signals from a remote controller. In this project, we’ll build our own remote controller to replicate...
Lonely Binary |
-
Project - IR Receiver
# Project - IR Receiver the **VS1838B** is a common and widely-used infrared (IR) receiver module. It’s designed to receive and decode infrared signals from remote controls, making it ideal...
Lonely Binary |
-
Remote infrared Sensor
Remote infrared (IR) works by transmitting invisible infrared light signals from a remote control to a receiving device, such as a TV, air conditioner, or home theater system. Here’s a...
Lonely Binary |
-
Project - Motion Detection Alarm
# Overview In this project, we’ll build a PIR motion sensor system with an Arduino. When motion is detected, the LED will turn on. # SR602  The...
Lonely Binary |
-
PIR Motion Sensor
# PIR Motion Sensor A **PIR (Passive Infrared) sensor** is an electronic device that detects motion by measuring infrared (IR) radiation emitted by objects in its field of view. It...
Lonely Binary |
-
Project - Distance Measurer
# Project - Distance Measurer In this project, we will build a distance measurer that can measure distances up to 4 meters using the HC-SR04 Ultrasonic Sensor and Arduino. ...
Lonely Binary |
-
Ultrasonic Sensor HC-SR04
# Overview An **ultrasonic sensor** is an electronic device used to measure distance or detect objects by emitting ultrasonic sound waves and analyzing the echoes that return. These sensors operate...
Lonely Binary |
-
Project - Musical Doorbell
# Musical Doorbell Let’s create a simple music doorbell using a button and a passive buzzer! When a guest presses the doorbell button, the music will play. **Wiring Instructions:** 1....
Lonely Binary |
-
Passive Buzzer
# Passive Buzzer A passive buzzer requires an external signal to create sound. It does not have a built-in oscillator, so it relies on a square wave signal or frequency...
Lonely Binary |