Home › Bundle › ESP32-S3 Gold Edition + PinPulse Shield

Lonely Binary ESP32-S3 N16R8 PinPulse Shield GPIO LED 16MB for Arduino IDE

Description

Stack & play

Plug in. Watch every pin.

Start with the ESP32-S3 Gold Edition: 16 MB flash, 8 MB PSRAM, pins already fitted.
Drop it onto the PinPulse shield. The 2 × 22 pins slide into the sockets. No soldering, no wiring.
Now every GPIO has an LED: 36 of them, buffered through 74HC14D, so you see HIGH and LOW without loading your signals.

An ESP32-S3 Gold Edition board with the PinPulse shield, which puts an LED on every GPIO so you can see pin states as your code runs.

Highlights

36 GPIO LEDs. Buffered through 74HC14D logic, so the LEDs show HIGH and LOW without loading SPI, I2C, UART or PWM signals.
Pins and sockets. Every GPIO has both a male pin and a female socket, taking any jumper wire.
Display port. A 15-way FPC connector links Lonely Binary TFT, E-Ink and touch displays with one ribbon cable (displays sold separately).
Two USB-C ports. One for native USB (HID, MSC, CDC), one for UART programming and debugging.

In the box

1 × ESP32-S3 Gold Edition board (N16R8)
1 × ESP32-S3 PinPulse shield
1 × USB-A to USB-C cable

Specifications

Module: ESP32-S3-WROOM-1, dual-core Xtensa LX7, 240 MHz
Memory: 16 MB flash, 8 MB PSRAM
Wireless: Wi-Fi 802.11 b/g/n, Bluetooth 5.0 LE
GPIO LEDs: 36, one per GPIO
Edge rows: 2 × 22 pins and sockets a side
Display connector: 15-way FPC

Works with

Arduino IDE, ESP-IDF, MicroPython and PlatformIO.

Smooth operation across the board

Nice three pack. Used all three and they work well.

Wrong part sent

The wrong part was sent, 4MB version sent, I ordered 16MB. I emailed the company last Wednesday July 1 and have heard nothing.

DS18B20 temp sensor monitor with ESP32-S3

Appriciate the quality and service from Lonely Binary. Second time purchasing from them and wont be the last. As a beginner in electronics world, their website has helped me a lot. Not many places you can find the required information, explanation and the materials you need at one spot. Keep up the good work lads.

Screw Terminal Boards

I started by emailing the company wasking for the standalone screw terminal boards for the ESP32-C3 . I really hope you start stocking them stateside, but thank you for shipping them so quickly and listing them on your site as well.