Description

Small boards that ask a USB-C PD charger for a fixed voltage and deliver it on a screw terminal. For powering DC projects and devices from a PD charger or power bank.

Highlights

• Five voltages. Pick 5, 9, 12, 15 or 20V on the DIP switch; no soldering or resistors.
• Up to 100W. 20V at 5A, when the charger and cable can supply it.
• Screw terminal. GND and VCC terminals for wires, plus header strips for breadboard use.
• Fixed output. The board holds the voltage you set; it does not renegotiate on the fly.
• Twelve boards. Enough for a bench supply, spares and several builds.

In the box

• 12 × USB-C PD trigger board, screw terminal fitted
• 2 × 40-pin straight breakaway male header strip
• 2 × 40-pin right-angle breakaway male header strip

Specifications

• Controller: CH224K, USB PD 3.0
• Output: 5, 9, 12, 15 or 20V, fixed
• Maximum: 100W (20V × 5A)
• Input: USB-C

Works with

Any USB-C PD charger or power bank that supports the voltage you select. Check your charger's rating before switching to 20V.